Eye swivel hook
Swivel eye attaches to a shackle, link or block.
Steel, as specified
LF — 11
LF — 11
Swivel Lifting Hook
A rotating lifting hook with safety latch for applications requiring orientation at the connection point.
Key attributes
- Feature
- Rotating swivel
- Closure
- Safety latch
- Rating
- Confirmed against requirement
- Supply basis
- Type, rating & documents
- Category
- Lifting & Material Handling
- Location
- Mumbai, India
- Drawing-ledSample or spec review
- Domestic & exportEnquiries welcome
- Mumbai basedMazgaon, Maharashtra
Quick answer
What is a swivel lifting hook?
A swivel lifting hook is a hook mounted on a swivel so it can rotate relative to the chain, sling or block it is attached to. This lets the rigger orient the hook and helps prevent twisting of the sling, while a spring latch closes the throat to retain the load.
Also known asSwivel hook · Eye swivel hook with latch · Rotating lifting hook
Key takeaways
- The swivel helps align the hook and reduce sling twist.
- A safety latch retains slings in the hook throat.
- Some swivels are not designed to rotate under load — confirm the type.
- Rated, marked and inspected for lifting use.
How Swivel Lifting Hooks Work in Practice
Swivel hooks are used on chain slings, hoists and rigging assemblies where the hook must be turned to engage a lifting point, or where a sling would otherwise twist. The latch keeps the sling eye or fitting inside the hook throat during handling.
Two broad types exist: plain swivels that allow positioning when unloaded, and bearing swivels designed to rotate under load. The type, working load limit and attachment style must be matched to the application.
Common Swivel Hook Forms
Bearing swivel hook
Thrust bearing allows rotation under load where specified.
Clevis swivel hook
Clevis and pin connection, typically to chain.
Self-locking hook
Latch locks closed under load until manually released.
How to Choose the Right Swivel Lifting Hook
01
Working Load Limit
Select by rated capacity and the governing standard, never by appearance or size alone.
02
Rotation Under Load
State whether the hook must turn while loaded; only bearing-type swivels are intended for this.
03
Throat Opening
The throat must accept the sling eye or fitting fully, with the latch able to close.
04
Inspection Regime
Hooks should be checked for throat opening, twist, wear and latch function before each use.
Safety note
Lifting and load-bearing products must be selected against a confirmed working load limit, the applicable standard and the actual rigging arrangement. Never use a part beyond its marked or documented rating, and inspect before every use.
Related products
More Lifting & Material Handling
Lifting & Material Handling
Crane Hook
Heavy-duty hook format used as the load connection within crane and block arrangements.
Lifting & Material Handling
Bottom Block
Hook-and-sheave bottom block assembly for guided industrial lifting arrangements.
Lifting & Material Handling
Vertical & Horizontal Plate Lifting Clamp
Plate clamp format for vertical or horizontal handling enquiries involving steel plates.