What is an SS eye bolt used for?

An SS eye bolt provides a corrosion-resistant attachment point for anchoring, suspension or handling. It is chosen for outdoor, marine, washdown and process environments where mild steel would rust or lose its coating.

Which stainless steel grade should I choose for an eye bolt?

The grade depends on the exposure. Describe whether the part faces fresh water, salt air, chemicals, cleaning agents or high temperature, and state any grade your project specifies. The material is then reviewed with the size and thread.

Is a stainless eye bolt stronger than a mild-steel eye bolt?

Not automatically. Strength depends on the specific material grade, condition, dimensions and design. Stainless is selected primarily for corrosion resistance, so any load requirement must be confirmed separately.

Why do stainless eye bolt threads sometimes seize?

Stainless threads can gall — the surfaces cold-weld under pressure and friction. Clean threads, controlled tightening and an appropriate assembly lubricant reduce the risk.

Can an SS eye bolt be used for lifting?

Only when the eye-bolt type, dimensions, rating, load direction, installation and applicable standard have been confirmed. Appearance alone is never enough to decide lifting suitability.

What details are needed for an SS eye bolt quotation?

Share the stainless grade or environment, thread size and pitch, shank length, eye dimensions, pattern, finish, quantity, delivery location and any drawing or sample.

Fasteners & Fittings

SS Eye Bolt

A stainless-steel threaded eye connection for applications where corrosion resistance and finish matter.

Key attributes

Material: Stainless steel
Configuration: Eye + threaded shank
Grade: As specified by buyer
Supply basis: Drawing, sample or spec
Category: Fasteners & Fittings
Location: Mumbai, India

Chat on WhatsApp

+919833072266 View specifications

Drawing-ledSample or spec review
Domestic & exportEnquiries welcome
Mumbai basedMazgaon, Maharashtra

Quick answer

What is an SS eye bolt?

An SS eye bolt is a stainless-steel fastener with a circular eye on a threaded shank. It provides a corrosion-resistant attachment point for anchoring, suspension or handling in outdoor, wet, marine or hygienic environments, where plain or plated mild steel would deteriorate faster.

Also known asStainless steel eye bolt · Stainless lifting eye · Corrosion-resistant eye bolt

Key takeaways

Chosen mainly for corrosion resistance and clean appearance.
The stainless grade should be stated to suit the environment.
Stainless threads can gall; assembly practice should be considered.
Lifting use requires a confirmed rating and applicable standard.

How SS Eye Bolts Work in Practice

SS eye bolts share the familiar eye-and-thread form of mild-steel eye bolts, but the stainless material changes where they can be used. They are specified for outdoor structures, marine and coastal sites, washdown areas and process environments where rust staining or coating breakdown is unacceptable.

Because stainless steels differ in corrosion behaviour, the grade should be selected for the actual exposure: chlorides, chemicals, temperature and cleaning regimes all matter. Share the environment with your enquiry so the material can be reviewed alongside size and thread.

Common SS Eye Bolt Forms

Collared (shoulder) pattern

Seats against the mounting face to better resist angular loads when fully tightened.

Plain shank pattern

For in-line loading along the shank axis where no shoulder is required.

Eye bolt with nut

Long shank passed through a clearance hole and secured with a stainless nut and washer.

Polished or natural finish

Surface finish can be discussed for visible, hygienic or architectural use.

How to Choose the Right SS Eye Bolt

Corrosion Exposure

Describe moisture, chlorides, chemicals and cleaning agents so a suitable stainless grade can be reviewed.

Load Direction

In-line loading suits most patterns; angular loads call for a collared eye bolt and reduced capacity.

Thread & Galling

Stainless-on-stainless threads can gall under load. Consider thread condition and assembly lubricant.

Mating Material

Contact with dissimilar metals can cause galvanic corrosion. State the material of the receiving part.

Safety note

Lifting and load-bearing products must be selected against a confirmed working load limit, the applicable standard and the actual rigging arrangement. Never use a part beyond its marked or documented rating, and inspect before every use.

SS Eye Bolt vs MS Eye Bolt

The form is the same; the material decides where each one performs best.

SS Eye Bolt vs MS Eye Bolt
Criteria	SS eye bolt	MS eye bolt
Base material	Stainless steel	Mild steel
Corrosion behaviour	Inherently corrosion resistant	Needs a protective finish outdoors
Typical environment	Outdoor, wet, marine or hygienic areas	Indoor, dry or protected service
Relative cost	Higher material cost	Generally more economical
Assembly note	Consider anti-galling practice	Standard assembly practice

Comparing options? View MS Eye Bolt

SS Eye Bolt Specifications

Use this framework to prepare a complete enquiry. Values are confirmed against your drawing, application and required quantity.

SS Eye Bolt specification framework
Parameter	Requirement basis
Product type	SS eye bolt
Base material	Stainless steel — state the grade required
Pattern	Collared, plain or with nut
Thread diameter & pitch	Metric or the required thread form
Threaded shank length	As per drawing or dimensional brief
Eye dimensions	Inside diameter, outside diameter & section
Surface finish	Natural, pickled or polished as required
Documentation	State material or inspection document needs

What to include in your enquiry

Stainless grade or service environment
Thread size, pitch and shank length
Eye dimensions and pattern
Quantity, finish and delivery location

Where SS Eye Bolts Are Used

Typical application areas. The intended task should always be disclosed so the product form and specification can be evaluated correctly.

Marine & coastal sites

Attachment points exposed to salt-laden air and spray

Food, pharma & process areas

Hygienic environments with regular washdown

Outdoor structures

Canopies, signage and façade fixing points

Chemical & water treatment

Where coating breakdown would expose mild steel

Have a specific application in mind? Share the load, environment and arrangement for a review.

SS Eye Bolt Reviews

No reviews yet

Have you sourced SS Eye Bolts from Lohar Industrial Fasteners? Share your experience with the product and our service.

Share your feedback

Fasteners & FittingsSS Eye Bolt

Product features

Product type: SS eye bolt
Base material: Stainless steel — state the grade required
Pattern: Collared, plain or with nut
Thread diameter & pitch: Metric or the required thread form
Threaded shank length: As per drawing or dimensional brief
Eye dimensions: Inside diameter, outside diameter & section